You must adhere to a set of instructions that are provided on this page in order for Linksys RE6350 Setup . by lengthening and boosting the signal strength of the wireless network using the AC1200 Wireless Range Extender.
Almost all types of wireless routers are compatible with this extender. It is improper to act in this manner. You can use the gadget to have a seamless, continuous online experience.
Linksys RE6350 Range Extender Configuration full guide
You must perform the following steps in order to configure Linksys RE6350 AC1200:
- Connect your booster to an electrical outlet to turn it on.
- The Linksys RE6350 Setup is turned on if an orange light is present.
- Take any WiFi-capable gadget and start the setup process on it.
- Additionally, select the wireless settings menu, then join the “Linksys Extender Setup-89” default network.
- Open any web browser and type extender.linksys.com into the address box after connecting to the repeater network.
- On this page, which configures the AC1200, you are.
- Install your booster to the current router or modem by following the instructions on the screen.
How to Setup Linksys RE6350 with the help of WPS button?
- Plug your repeater a foot distant from the primary router or modem to begin setting up your Linksys RE6350 .
- Plugging your Linksys RE6350 Setup into an outlet will turn it on.
- Push the WPS button once the booster has a power light.
- Push the same button on your wifi router at the same time.
- Watch the AC1200 light until it stops blinking.
- Your repeater has been successfully configured using the WPS method if you can see the AC1200’s solid green light.
- Place the booster at the preferred spot after unplugging it.
Features of Linksys RE6350 Setup
- Dual-band wifi connectivity for greater coverage according to the IEEE 802.11ac wireless networking standard
- the provision of crossband technologies
- Linksys RE6350 2 x 2 Spatial Streams, which aid in transmitting correct wifi signals, are easy to configure and have a location finder.
- A modern or sleek style
- The combined speed of N300 and AC867 Mbps is 150 mbps.
- Stronger, more dependable, and stable wifi communication is made possible through beamforming technology.
Updated Firmware for the Linksys RE6350 Extender
To update the AC1200 firmware, do the following:
- Start your Linksys AC1200 router.
- Any Wireless or Wifi device should open a web browser.
- To log into your Linksys RE6350, type extender.linksys.com or 192.168.1.1 in the address bar.
- Press Login after entering the default password and username.
- Now, search for “Administration” on the Linksys RE6350 Setup Page.
- Click on Firmware Upgrade after that.
- If there are any updates available, AC1200 will automatically detect them.
- Select Update Now.
- Your Linksys WiFi Extender has now been successfully updated.
- It’s finished when you click Save.
How to perform Linksys RE6350 Setup reset process?
Simply follow the instructions below to restore the Linksys RE6350 AC1200 Wifi Extender to its factory default settings:
- Finding the reset button on your Linksys RE6350 WiFi Extender is the first step.
- Make sure RE6350 is powered on.
- Find the reset button, then press and hold it for a short period of time.
- Hold off on rebooting the Linksys AC1200 until it is ready.
- The wifi extender will then restart and reset to its factory settings.
- You have finished the Linksys RE6350 Reset successfully.
