When it comes to extending WiFi signals from the current router to remote areas of a home or office, Wavlink WiFi range extenders are the top choice among users around the world. Depending on your WiFi requirements, you can choose from a variety of Wavlink extender models and configure them with ease using ap.setup web address.
You’ve come to the right post if you recently purchased a new Wavlink extender and are unsure about how to set it up. Here, we shall draw the curtain from the installation of the Wavlink extender process. Let’s dive right in.
Setting Up a Wavlink WiFi Range Extender
The following considerations should be made as you set up the range extender:
- Since the Wavlink Extender is a plug-and-play device, it is advised that you reset it before setting it up.
- The extender must be turned on, the power supply must be consistent throughout set up, and the PC must have an active internet connection.
- Write down the network name and password for the router.
- Extender Mode and Access Point Mode are the two configuration options available for Wavlink Extenders. While the second mode gives you faster WiFi by reducing interference, the first option allows the extender to reproduce the wireless signals without utilizing any untidy wires. They are simply switchable between working in Access Point Mode and Extender Mode.
Activate the extender mode on the Wavlink extender
Using the wifi wavlink com website, the extender can be installed. The setup CD is not required to be used. To configure the extender in Extender Mode, adhere to these steps:
- Connect the extender to an electrical outlet.
- Activate your home router.
- Attach the range extender.
- Check the Ethernet cable to see if it is damaged or if you are having trouble connecting to Wavlink Extender. If so, swap it out right away with the new one.
- When finished, open a web browser on your PC.
- In the address box, type wifi wavlink com and press Enter.
- The login screen for the Wavlink extender will appear.
- To proceed, enter the username and password.
- Decide to use a wireless range extender.
- Establish a wireless network connection.
- Enter your password in the passphrase key.
- A new page with setup instructions for the on-screen interface will appear.
Simply install and set up Wavlink Extender by carefully following the instructions. Once finished, unplug the device and then re-plug it, but not right away. You can now access a quick internet connection from any location in your home or place of business.
Wavlink extender can be configured in access point mode
To deploy the extender as an access point, you are going to need an Ethernet cable that is sufficiently long so that it can connect to the Wavlink Extender. When you are prepared, follow the steps listed below:
- Plug in the range extender to the wall.
- Connect the extender and router using an Ethernet wire.
- Switch on the computer’s power.
- Join it to a quick network link.
- Launch a web browser, such as Safari, Firefox, Edge, Internet Explorer, or Chrome.
- Find the Wavlink WiFi extender login page.
- A username and password are required.
- If it’s your first time accessing it, enter the default information. Otherwise, log in using the current credentials.
- Choose the Access Point radio button.
- Establish a new, expanded broadcasting network.
- When finished, press the Next button.
- Make an admin password for your network for security reasons.
Congrats! Access Point Mode has been selected for your Wavlink extender. If you encounter any technical issues while going through the Wavlink Extender Setup procedure, make sure to restart your device.
