The Linksys RE4000W Extender Setup eliminates dead zones and extends wireless coverage up to 2,300 square meters. With dual 2.4 GHz and 5 GHz WiFi bands, the extender offers data transfer speeds of up to N300 + N300 Mbps. Once the Linksys RE4000W has been configured, you can use its Cross-Band technology to maximize the simultaneous use of both bands for streamlined gaming and streaming.
This page contains comprehensive instructions for configuring the Linksys RE4000W N600 WiFi range extender. Keep reading.
Linksys N600 setup for model RE4000W can be accomplished in two different ways. They are known as the WPS Method and the Manual Method.
Five steps to setup the Linksys RE4000W extender using the WPS method
WiFi Protected Setup (WPS) is the simplest method for configuring the Linksys RE4000W range extender. Follow the instructions below for the Linksys RE4000W Extender Setup using the WPS method:
- Connect the Linksys RE4000W N600 to an electrical outlet and turn it on.
- Press the WPS button on the N600 wireless range extender.
- Press the WPS button on the WiFi router in your home.
- After that Wait for the LED solid green light.
- Plug out your Linksys range extender from the wall socket and place it in a new location in your home.
Linksys RE4000W Extender Setup via the manual method
Follow the steps outlined below to perform Linksys N600 extender setup (RE4000W) using the Manual Method:
- Plug the Linksys N600 RE4000W dual-band WiFi range extender into an electrical outlet and power it on.
- Connect the Linksys extender to the WiFi network using an Ethernet cable.
- Then, turn on your smart device like laptop or computer and connect it to a WiFi network.
- Launch a web browser of your choosing.
- Input extender.linksys.com into the url bar.
- Tap the Enter button.
- When complete, the Linksys RE4000W login page is displayed.
- In the next step enter your information like username and password.
- After that tap on the login button.
- The following screen displays Linksys N600 RE4000W extender configuration instructions.
- You need only follow the on screen steps to set up the Linksys RE4000W Extender.
That is all! This is how to configure the Linksys RE4000W N600 WiFi range extender. If you encounter any type of technical difficulty during the Linksys RE4000W manual configuration process, feel free to contact our support team at any time.
How to update Linksys RE4000W Extender Setup firmware?
Does your WiFi extender act erratically all of a sudden? Does it not provide the necessary speed despite a successful Linksys N600 WiFi range extender installation? If so, immediately update the Linksys RE4000W’s firmware.
Here are the instructions for updating the firmware on your Linksys N600 RE4000W wireless extender:
- Download the most recent version of Linksys N600 firmware to your computer.
- Start your WiFi extender up.
- Launch a web browser on your computer.
- Enter the username and password to access your Linksys RE4000W extender.
- Select Firmware Update option from the menu after the logged in.
- After that, click the Select File button.
- Select the firmware file that you downloaded.
- Click the Upgrade Now button.
- Now, wait a while and allow the Linksys N600 RE4000W firmware to update successfully.
That’s how your Linksys RE400W Setup firmware is successfully complete.
Common issue that you might get during the Linksys RE4000W Extender setup
- Linksys RE4000W error with no light
- Linksys RE4000W cannot be updated firmware
- Can’t access the default login URL
- Linksys N600 extender orange light error
- Linksys N600 WiFi extender configuration page does not respond
- Inability to reset Linksys RE4000W
- Impossible to configure Linksys N600 RE4000W extender
- Linksys N600 failed login
- The extender does not activate
- Unable to access the IP address.
- Internet connection issues
- Forgot the password for the Linksys extender
- Lost configuration CD
Contact our highly-skilled technicians without delay for immediate assistance with any of the aforementioned Linksys RE4000W N600 dual-band wireless range extender configuration issues.
Linksys RE4000W troubleshooting steps
Below are some DIY troubleshooting tips for novice users to fix Linksys RE4000W Extender Setup issues:
- Verify that the wall plug is not damaged or short-circuited.
- Make sure that the extender is receiving a good amount of power from the wall socket.
- Keep your extender away from walls, room corners, microwave ovens, aquariums, cordless phones, Bluetooth devices, metal objects, aluminum studs, and so on.
- If you are having trouble logging into your Linksys RE4000W extender, ensure that the correct URL is entered in the address bar.
- Verify all wired connections. Never utilize a damaged cable.
- Use only the most recent version of a web browser when logging into the Linksys N600 RE4000W.
- Restart your Linksys N600 RE4000W range extender and attempt to configure it again.
- Update the latest firmware version.
- Reset the extender’s settings to the factory defaults.
None of the aforementioned troubleshooting suggestions have resolved your problems? Avoid panic. Simply contact our experts to have your Linksys RE4000W extender configuration issues resolved.
Read more:
Linksys Extender Setup installation
