Autism, Alzheimer’s disease, stroke, air embolism, cerebral palsy, ulcers, diabetes, and a range of other debilitating physical ailments can be treated using hyperbaric oxygen therapy administered in a home hyperbaric chamber. Under the close supervision of a doctor and qualified test administrators, a patient suffering from any of these conditions may receive hyperbaric oxygen therapy.
A patient undergoing this hyperbaric treatment will asking to lie down or take a seat within an acrylic chamber while pure oxygen is slowly add to the air inside. Multiplace chambers are design to treat multiple patients at once, while single-patient or “monoplace” chambers can be operat at home and do not call for the assistance of medical personnel. The fire safety features built into a home hyperbaric chamber are sufficient and effective. However, before spending money on one, it’s wise to make sure it comes with a few extras that improve the patient’s experience. Some examples of such things are provided below.
Air-Conditioner
An air conditioner is crucial to the proper functioning of a hyperbaric chamber’s ventilation system. In addition to controlling the humidity within the chamber by decreasing the water content of the air, it also lowers the temperature of the air entering the chamber by nearly 40 degrees. In addition, the patient will not be bothered by the motor’s operation because it is quite quiet.
Cleaner
Products containing oxygen that are stored under pressure can benefit from cleaning with oxygen that also contains a rust inhibitor. The non-toxic cleanser is designed for heavy-duty use in industrial settings. It can also break down naturally over time.
Cooler
This ice chest is designed specifically for Scuba divers. It aids in lowering the temperature of the incoming air by nearly 30 degrees. It also reduces the amount of moisture in the chamber, making it more comfortable for individuals who could otherwise be irritated by the rising humidity. It’s great because it doesn’t need electricity or any other external power source to work. Keeping these filters full of ice and water at all times is all that is required for them to accomplish their job.
Silencer/Cooler
This is a novel component that serves dual purposes as a cooler and a silencer. This lightweight and compact equipment is connect to the chamber and compressor. It lessens the roar of the incoming air and cools down the hot air, both of which are beneficial. It’s a small gadget, but it makes a huge difference in the patients’ quality of life.
Disinfectant
Microban is a powerful disinfectant that has shown to be effective against both HIV-1 and MRSA. It is highly successful at keeping a hyperbaric chamber clean and sanitary because it combines the benefits of a fungicide, mildewstat, bactericide, and virucide into a single, potent formulation.
Put in some earplugs
Compressing and decompressing a hyperbaric chamber can be very uncomfortable for some patients. This complement was make especially for that group. The pressure regulator integrated into these earplugs can adapt the sensations experienced by the ear to the varying pressure flows in the system. These are often worn for the duration of a session, plus an additional 15 minutes. The effect of pressure changes on the middle ear is substantially diminish and can modulate by these. These earplugs can use for up to four sessions before discard, or they can be thrown away after one use.
Equalizer
These aids are also use to restore normal air pressure in the middle ear. They are worn beforehand so the ear can become acclimate to the chamber’s pressure changes without any problems. In other situations, equalisers are utilise to help the patient’s ear return to normal balance following a session, so alleviating any pain or discomfort the patient may experience. These are often give as a prescription and come with either several or single sleeping compartments.
A Helping Hand
A simple to set up and use personalised bar. Its purpose is to help people get into and out of their rooms. Aluminum with a powder coating is the material of choice for most grab bars.
Lubricants
These are crucial for the proper operation of the zippers on individual hyperbaric chambers. Products like ZipTech, a lubricant, can be useful for this. The likelihood of mishaps can reduce if the zippers work properly.
Machines that Extract Pure Oxygen from Air
The average oxygen content of air is 21%. That figure rises to 27% when subjected to compression in a portable hyperbaric chamber operating at pressures of 1.3 to 1.5 ATA. Patients who use a mask and a concentrator can take in oxygen concentrations of up to 95%. The FDA does not approve of concentrator use for all brands of home hyperbaric chambers. Thus, to avoid any legal complications that may arise after acquiring an unauthorised model, it is best to do a survey of models with this particular attachment and check on the licence of the firm.
Platforms
Moving in and out of the chamber is made easier with the use of platforms. In addition, the compressor can fit comfortably beneath them. Typically, these will coat with a powdered form of aluminium. The platforms typically contain rails and steps to make getting on and off easier.
Measures Blood Oxygen Levels With a Pulse
The Food and Drug Administration has given its blessing to this device, which measures blood oxygen levels before and after a session in a hyperbaric chamber. It’s a fingertip pulse oximeter that comes with a neck strap, a carrying case, and two sets of Triple A batteries.
These supplementary accessories substantially aid in patient comfort and safety, and should be carefully consider when selecting a personal hyperbaric chamber.
for more articles click here